The Snorkel Ultimate has been specially developed for maximum fresh air supply to the CSL Carbon Airbox and is the perfect addition for demanding S54 drivers who want to combine performance, efficiency and reliability.The system consists of a precisely manufactured snorkel and an additional air duct that optimises the fresh air supply via the original upper duct. In combination with an air duct from the front of the vehicle, the snorkel ensures a constantly cool and oxygen-rich intake air - essential for the full performance of the S54 engine.the snorkel is compatible with the original CSL airbox as well as with the Karbonius carbon airbox. The additional duct fits the original shortened CSL intake bonnet (can also be shortened from a non-CSL model).Your advantages at a glance:✔ Optimised fresh air supply for maximum engine performance✔ Reduction of heat influence and flow losses✔ Direct lateral air intake into the snorkel✔ Perfect fit for CSL & Karbonius airbox✔ Motorsport-tested & long-term tested✔ High-quality, temperature-stable materialThe system was tested over several months in everyday use and on the racetrack under a wide range of conditionsTechnical data Material: PA-CF (carbon fibre nylon) in 3D printing process Connection diameter: 83 mm (standard) extremely heat-resistant high mechanical strength vibration-resistant Optional: variable connection size on request Scope of delivery: 1× Ultimate snorkel 1× additional air duct Suitable for:BMW E46 M3 and CSLOriginal CSL Carbon AirboxCarbon fibre carbon airboxShortened CSL intake hoodImportant notes:Motorsport articles without a parts certificate or an ABE can be approved for road traffic by means of an individual approval in accordance with § 21 StVO. Without this approval, they are intended exclusively for use on race tracks. If the product text does not expressly refer to a parts certificate or a general operating licence (ABE), it is a motorsport article. The installation of vehicle spare parts should only be carried out by a qualified specialist workshop. This serves to ensure proper function and to maintain road safety

If liquid collects behind the mirror glass in the electrochromic interior mirror of the BMW Z4 (incl. Z4 M), M3 E46 or M5 E39, there is a risk that interior surfaces will be damaged. With our replacement glass, you can replace the defective mirror glass in good time - and at the same time fully retain the automatic dimming function. Scope of delivery: 1x new replacement mirror glass with automatic dimming function Suitable for:BMW E39 M5, E46 M3 incl. CSL, Z4 E85, E86 incl. M (not suitable for trapezoidal design)Important notes:Motorsport articles without a parts certificate or an ABE can be approved for road use by means of an individual approval in accordance with § 21 StVO. Without this approval, they are intended exclusively for use on race tracks. If the product text does not expressly refer to a parts certificate or a general operating licence (ABE), it is a motorsport article. The installation of vehicle spare parts should only be carried out by a qualified specialist workshop. This serves to ensure proper function and to maintain the roadworthiness of the vehicle.

New LCD replacement display centred suitable for BMW E38, E39, E46 incl. M3 and CSL on-board monitor Offer your E38, E39 or E46 a new, high-quality display! Over time, various problems can occur with the on-board monitor, such as stains in the display, pixel errors, display breakage or deep scratches.These defects can only be rectified with a replacement display.Problems with the current displays on the market!Many of the displays currently available for these models are off-centre, which means that the image is not displayed in the middle and is often not fully usable.Advantages of our display: Perfect image display: The image is centred and fully visible Optimum utilisation: No loss of image information or uneven display OEM quality Scope of delivery: 1x New LCD on-board monitor replacement display centred Suitable for:BMW E38, E39, E46 incl. M3 and CSL on-board monitor Important notes:Motorsport articles without a parts certificate or an ABE can be approved for road traffic by means of an individual approval in accordance with § 21 StVO. Without this approval, they are only intended for use on race tracks. If the product text does not expressly refer to a parts certificate or a general operating licence (ABE), it is a motorsport article. The installation of vehicle spare parts should only be carried out by a qualified specialist workshop. This serves to ensure proper function and to maintain the roadworthiness of the vehicle.

Have you installed an E46 CSL tailgate or are you planning a conversion? Then you will need this adapter cable for the licence plate lights. The CSL tailgate (including replicas) does not have a handle strip - instead, the licence plate lights are integrated directly into the tailgate. Reference number: 61127833548 Scope of delivery: 1x MW adapter cable licence plate light CSL tailgate 2x OEM BMW licence plate light Suitable for: BMW E46 M3 and CSL Important notes: Motorsport articles without a parts certificate or an ABE can be approved for road traffic by means of an individual approval in accordance with § 21 StVO. Without this approval, they are intended exclusively for use on race tracks. If the product text does not expressly refer to a parts certificate or a general operating licence (ABE), it is a motorsport article. The installation of vehicle spare parts should only be carried out by a qualified specialist workshop. This serves to ensure proper function and to maintain the roadworthiness of the vehicle.

Have you installed an E46 CSL tailgate or are you planning a conversion? Then you will need this LED adapter cable for the licence plate lights. The CSL tailgate (including replicas) does not have a handle strip - instead, the licence plate lights are integrated directly into the tailgate.Reference number: 61127833548Scope of delivery: 1x MW adapter cable licence plate light LED CSL tailgate 2x OEM BMW LED licence plate light Suitable for:BMW E46 M3 and CSLImportant notes:Motorsport articles without a parts certificate or an ABE can be approved for road use by means of an individual approval in accordance with § 21 StVO (German Road Traffic Regulations), without this approval they are only intended for use on race tracks.If the product text does not expressly refer to a parts certificate or a general operating licence (ABE), it is a motorsport article.The installation of vehicle spare parts should only be carried out by a qualified specialist workshop. This serves to ensure proper function and to maintain the roadworthiness of the vehicle.

Get the highest quality MW centre console ALL IN ONE PACKAGE 2 suitable for BMW E46 Coupe or Convertible also M3. If you want to install an E46 CSL centre console or are planning to do so, this set is essential! We supply all the parts you need to convert standard vehicles with centre armrests to CSL centre consoles simply and easily. When converting to the E46 CSL centre console, the mirror adjustment switch is relocated from the driver's door to the centre console. The original wiring harness can therefore no longer be used.Full functional retention: All functions are fully retained and no coding is required. Reference number: 51167895578, 51167896361, 51167896362Scope of delivery: Karbonius centre console 1x1 Plain high gloss for LHD vehicles / RHD on request + certificate of authenticity Frame for mirror adjustment button and hazard warning flasher button Original MuenchnerWerke conversion wiring harness for the mirror adjustment button (only suitable for part number mirror adjustment button: 61318373691, 61318373732, 61318373692 and 61318373689) Original BMW E46 M3 CSL handbrake bag Original BMW E46 M3 CSL fabric inlay for storage compartment Original BMW E46 M3 CSL fastening set Original BMW E46 M3 CSL 2x sealing plugs Installation instructions, with step-by-step instructions for easy and trouble-free installation Suitable for:BMW E46 Coupé and Convertible also M3 with centre armrest and two mirror adjustment switch plugs. Part numbers mirror adjustment switch: 61318373691 (black), 61318373732 (white), 61318373692 (grey) and 61318373689 (yellow)Important notes:Motorsport articles without a parts certificate or an ABE can be approved for road use by means of an individual approval in accordance with § 21 StVO. Without this approval, they are only intended for use on race tracks. If the product text does not expressly refer to a parts certificate or a general operating licence (ABE), it is a motorsport article. The installation of vehicle spare parts should only be carried out by a qualified specialist workshop. This serves to ensure proper function and to maintain the roadworthiness of the vehicle.

Get the highest quality MW centre console ALL IN ONE PACKAGE suitable for BMW E46 Coupe or Convertible also M3. If you want to install an E46 CSL centre console or are planning to do so, this set is essential! We supply all the parts you need to convert standard vehicles with centre armrests to CSL centre consoles simply and easily. When converting to the E46 CSL centre console, the mirror adjustment switch is relocated from the driver's door to the centre console. The original wiring harness can therefore no longer be used.Full functional retention: All functions are fully retained and no coding is required. Reference number: 51167895578, 51167896361, 51167896362 Scope of delivery: Karbonius centre console 1x1 Plain high gloss for LHD vehicles / RHD on request + certificate of authenticity Frame for mirror adjustment button and hazard warning flasher button Original MuenchnerWerke conversion wiring harness for the mirror adjustment button (only suitable for part number mirror adjustment button: 61316901376 and 61316901383) Original BMW E46 M3 CSL handbrake bag Original BMW E46 M3 CSL fabric inlay for storage compartment Original BMW E46 M3 CSL fastening set Original BMW E46 M3 CSL 2x sealing plugs Installation instructions, with step-by-step instructions for easy and trouble-free installation Suitable for:BMW E46 Coupé and Convertible also M3 with centre armrest and one plug mirror adjustment button Part number mirror adjustment button: 61316901376 (blue) and 61316901383 (red)Important notes:Motorsport articles without a parts certificate or an ABE can be approved for road traffic by means of an individual approval in accordance with § 21 StVO. Without this approval, they are only intended for use on race tracks. If the product text does not expressly refer to a parts certificate or a general operating licence (ABE), it is a motorsport article. The installation of vehicle spare parts should only be carried out by a qualified specialist workshop. This serves to ensure proper function and to maintain the roadworthiness of the vehicle.

Reference number: 21212282667 and 21212229900Scope of delivery: 1x LuK dual mass flywheel incl. screw set 1x Luk clutch kit incl. screw set 1x SACHS guide bearing 1x OEM BMW release lever 1x OEM BMW ball stud H=20MM 1x OEM BMW spring U-bolt 1x OEM BMW fitting sleeve D=14,5MM Suitable for:BMW E46 M3 Coupé, Convertible and CSLImportant notes:Motorsport articles without a parts certificate or an ABE can be approved for road traffic by means of an individual approval in accordance with § 21 StVO. Without this approval, they are intended exclusively for use on race tracks. If the product text does not expressly refer to a parts certificate or a general operating licence (ABE), it is a motorsport article. The installation of vehicle spare parts should only be carried out by a qualified specialist workshop. This serves to ensure proper function and to maintain the roadworthiness of the vehicle.

The connecting cable is a 100% perfect fit, has the correct length and is used to connect the multifunction buttons (MFL) to the coil spring or slip ring.The wiring harness is already fitted with the correct plugs.The wiring harness is characterised by the original manufacturer's cable colours and cross-sections as well as the pins.The processed products are OEM.Our cables are manufactured in accordance with DIN EN 13602 and ISO 6722 automotive industry standards.Reference number: 61318386947Scope of delivery: Original MuenchnerWerke multifunction steering wheel connection cable Suitable for:BMW E39, E46 and E53Important notes:Motorsport articles without a parts certificate or an ABE can be approved for road traffic by means of an individual approval in accordance with § 21 StVO.Without this approval, they are intended exclusively for use on race tracks.If the product text does not expressly refer to a parts certificate or a general operating licence (ABE), it is a motorsport article.The installation of vehicle spare parts should only be carried out by a qualified specialist workshop. This serves to ensure proper function and to maintain the roadworthiness of the vehicle.

Get the high-quality MW conversion wiring harness centre console mirror adjustment 1 plug suitable for BMW E46 Coupe or Convertible also M3.If you want to install an E46 CSL centre console or are planning to do so, this conversion wiring harness is essential! We supply the required conversion wiring harness to make the conversion to the CSL centre console simple and straightforward.When converting to the E46 CSL centre console, the mirror adjustment switch is relocated from the driver's door to the centre console. The original wiring harness can therefore no longer be used.Full functional retention: All functions are fully retained and no coding is required. Scope of delivery: Original MuenchnerWerke conversion wiring harness for the mirror adjustment button (only suitable for part number mirror adjustment button: 61316901376 and 61316901383) Installation instructions, with step-by-step instructions for easy and trouble-free installation Suitable for: BMW E46 Coupé and Convertible also M3 with centre armrest and one plug mirror adjustment switch. Part numbers mirror adjustment switch: 61316901376 (blue) and 61316901383 (red)Important notes:Motorsport articles without a parts certificate or an ABE can be approved for road traffic by means of an individual approval in accordance with § 21 StVO. Without this approval, they are only intended for use on race tracks. If the product text does not expressly refer to a parts certificate or a general operating licence (ABE), it is a motorsport article. The installation of vehicle spare parts should only be carried out by a qualified specialist workshop. This serves to ensure proper function and to maintain the roadworthiness of the vehicle.

Get the high-quality MW conversion wiring harness centre console mirror adjustment 2 plugs suitable for BMW E46 Coupe or Convertible also M3.If you want to install an E46 CSL centre console or are planning to do so, this conversion wiring harness is essential!We supply the required conversion wiring harness to make the conversion to the CSL centre console simple and straightforward.When converting to the E46 CSL centre console, the mirror adjustment switch is relocated from the driver's door to the centre console. The original wiring harness can therefore no longer be used.Full functional retention: All functions are fully retained and no coding is required.Scope of delivery: Original MuenchnerWerke conversion wiring harness for the mirror adjustment button (only suitable for part number mirror adjustment button: 61318373691, 61318373732, 61318373692 and 61318373689) Installation instructions, with step-by-step instructions for easy and trouble-free installation Suitable for:BMW E46 Coupé and Convertible also M3 with two plug mirror adjustment switches.Part numbers mirror adjustment switch: 61318373691 (black), 61318373732 (white), 61318373692 (grey) and 61318373689 (yellow)Important notes:Motorsport articles without a parts certificate or an ABE can be approved for road traffic by means of an individual approval in accordance with § 21 StVO (German Road Traffic Regulations) werden.Ohne this approval is intended exclusively for use on race tracks.If the product text does not expressly refer to a parts certificate or a general operating licence (ABE), it is a motorsport article.The installation of vehicle spare parts should only be carried out by a qualified specialist workshop. This serves to ensure proper function and to maintain the roadworthiness of the vehicle.

Take the opportunity to increase the driving comfort of your E46! With our high-quality MW retrofit wiring harness, you can easily and effectively retrofit the cruise control and multifunction buttons in your E46.Add this MW retrofit wiring harness suitable for BMW E46 with N42, M54, M47 & M57 engine and enjoy an upgrade that improves your driving experience!Full function retention: All functions are fully retained, no coding is required.Scope of delivery: Original MuenchnerWerke retrofit wiring harness E46 cruise control multifunction steering wheel Installation instructions, with step-by-step instructions for easy and trouble-free installation Suitable for:BMW E46 with N42, M54, M47 and M57 engineImportant notes:Motorsport articles without a parts certificate or an ABE can be approved for road traffic by means of an individual approval in accordance with § 21 StVO (German Road Traffic Regulations) werden.Ohne this approval is intended exclusively for use on race tracks.If the product text does not expressly refer to a parts certificate or a general operating licence (ABE), it is a motorsport article.The installation of vehicle spare parts should only be carried out by a qualified specialist workshop. This serves to ensure proper function and to maintain the roadworthiness of the vehicle.

Take the opportunity to increase the driving comfort of your E46! With our high-quality MW retrofit wiring harness, you can easily and effectively retrofit Park Distance Control in your E46.Add this MW retrofit wiring harness suitable for BMW E46 and enjoy an upgrade that improves your driving experience!Full function retention: all functions are fully retained, coding is required.Scope of delivery: Original MuenchnerWerke retrofit wiring harness E46 Park Distance Control Suitable for: BMW E46 Coupé, Saloon, Convertible and Touring also M3 and CSLImportant notes:Motorsport articles without a parts certificate or an ABE can be approved for road traffic by means of an individual approval in accordance with § 21 StVO (German Road Traffic Regulations). Without this approval, they are intended exclusively for use on race tracks.If the product text does not expressly refer to a parts certificate or a general operating licence (ABE), it is a motorsport article.The installation of vehicle spare parts should only be carried out by a qualified specialist workshop. This serves to ensure proper function and to maintain the roadworthiness of the vehicle.

This retrofit cable allows you to activate the surround sound function in your E46 or to deaktivieren.Bei retrofitted Harman Kardon sound system this function is not available.Indispensable for using the surround sound function.Scope of delivery: Original MuenchnerWerke retrofit cable for E46 Harman Kardon surround sound function Installation instructions, with step-by-step instructions for easy and trouble-free installation Suitable for:BMW E46 Coupé, Saloon, Convertible and Touring also M3 and CSL Important notes:Motorsport articles without a parts certificate or an ABE can be approved for road traffic by means of an individual approval in accordance with § 21 StVO (German Road Traffic Regulations) werden.Ohne this approval is intended exclusively for use on race tracks.If the product text does not expressly refer to a parts certificate or a general operating licence (ABE), it is a motorsport article.The installation of vehicle spare parts should only be carried out by a qualified specialist workshop. This serves to ensure proper function and to maintain the roadworthiness of the vehicle.

This set is essential, especially if you want to glass bead or plastic blast the oil filter housing.Thanks to identical dimensions and material properties, the sealing discs correspond exactly to the original manufacturer components. Ideal for a reliable and long-lasting sealing effect. Perfect for anyone who values precision, durability and OEM compatibility. Scope of delivery: 2x MW sealing disc screw plug very small 1x MW sealing disc screw plug small 1x MW sealing disc for screw plug medium 1x MW sealing disc for screw plug large 1x MW oil pressure switch sealing disc Suitable for:BMW E36 Z3 M Coupé and ConvertibleBMW E36 M3 Coupé, Saloon and ConvertibleBMW E46 M3 Coupé, Convertible and CSLBMW E85 Z4 M RoadsterBMW E86 Z4 M CoupéImportant notes:Motorsport articles without a parts certificate or an ABE can be approved for road use by means of an individual approval in accordance with § 21 StVO. Without this approval, they are only intended for use on race tracks. If the product text does not expressly refer to a parts certificate or a general operating licence (ABE), it is a motorsport article. The installation of vehicle spare parts should only be carried out by a qualified specialist workshop. This serves to ensure proper function and to maintain road safety

This set is essential, especially if you want to glass bead or plastic blast the oil pan.Thanks to identical dimensions and material properties, the sealing discs correspond exactly to the original manufacturer's components. Ideal for a reliable and long-lasting sealing effect. Perfect for anyone who values precision, durability and OEM compatibility. Scope of delivery: 2x MW sealing disc oil pan crankcase breather Suitable for:BMW E46 M3 Coupé, Convertible and CSLBMW E85 Z4 M RoadsterBMW E86 Z4 M CoupéImportant notes:Motorsport articles without a parts certificate or an ABE can be approved for road use by means of an individual approval in accordance with § 21 StVO. Without this approval, they are intended exclusively for use on race tracks. If the product text does not expressly refer to a parts certificate or a general operating licence (ABE), it is a motorsport article. The installation of vehicle spare parts should only be carried out by a qualified specialist workshop. This serves to ensure proper function and to maintain road safety

Seatbelt Protector - maximum protection with a discreet OEM look No more scratches, rattling and wear and tear: the Seatbelt Protector is glued directly to the inside of the driver and passenger seatbelt buckle and reliably protects your vehicle centre console from damage. At the same time, it reduces annoying noises when unbuckling and ensures a quieter driving experience. The 70 mm version is extra wide and also protects the corners of the belt buckle, where wear and tear would otherwise occur particularly quickly - for optimum all-round protection in everyday use. Thanks to its discreet OEM look, the protector blends unobtrusively into the interior and looks like an original vehicle part. Unobtrusive, high-quality and functional - ideal for anyone who wants to protect their vehicle without changing the design. Made for the interior, the protector is compatible with belt buckles made of ABS and PP plastic and can withstand even extreme temperatures from -20 °C to +60 °C. A small upgrade with a big impact - for a neat interior and lasting value retention of your vehicle. 🚗✨ Goodbye scratches - peace and quiet in the interior! Why you need it: ✔️ Reliably protects the centre console from scratches ✔️ Absorbs rattling & knocking noises ✔️ Universally applicable - across all manufacturers ✔️ Self-adhesive & super easy to install ✔️ Strong, durable adhesive strength ✔️ Suitable for ABS & PP belt buckles ✔️ Tested for -20 °C to +60 °C ✔️ Discreet, unobtrusive OEM design - not noticeable, but immediately effective! ✔️ No fraying of the interfaces ✔️ 🇩🇪 Engineered in Germany 🇩🇪 Scope of delivery: 2x Seatbelt Protector / belt buckle protector 70mm for driver and passenger belt buckle 2x degreasing cloth

This high-quality seal set was specially developed for the maintenance and repair of the solenoid valves in the SMG II hydraulic unit. The set includes 16 heat- and oil-resistant O-rings that are a perfect fit for the proportional directional control valves and proportional pressure control valves of the hydraulic unit. Thanks to identical dimensions and material properties, the O-rings correspond exactly to the original manufacturer components and enable the four solenoid valves to be completely overhauled - ideal for a reliable and long-lasting sealing effect. Perfect for anyone who values precision, durability and OEM compatibility.Scope of delivery: 1x O-ring set (16-piece) suitable for SMG II hydraulic unit solenoid valves Suitable for:BMW E46 M3 and CSLImportant notes:Motorsport articles without a parts certificate or an ABE can be approved for road traffic by means of an individual approval in accordance with § 21 StVO. Without this approval, they are intended exclusively for use on race tracks. If the product text does not expressly refer to a parts certificate or a general operating licence (ABE), it is a motorsport article. The installation of vehicle spare parts should only be carried out by a qualified specialist workshop. This serves to ensure proper function and to maintain road safety

This high-quality starter guard was specially developed by us for the BMW E46 M3 series. The set includes the starter guard and two matching cable ties. In the past, it has become increasingly apparent that the standard starter protection hardens over time and becomes porous or is completely missing. In some cases, this results in a short circuit between the B+ cable on the starter motor and the airbox, especially when converting to a carbon fibre airbox.This short circuit is usually visible at the front screw connection of the airbox due to material discolouration.Scope of delivery: 1x MW starter protection set Suitable for: BMW E36 Z3 M Coupé and ConvertibleBMW E46 M3 and CSLBMW E85 Z4 M RoadsterBMW E86 Z4 M CoupéImportant notes:Motorsport articles without a parts certificate or an ABE can be approved for road use by means of an individual approval in accordance with § 21 StVO. Without this approval, they are only intended for use on race tracks. If the product text does not expressly refer to a parts certificate or a general operating licence (ABE), it is a motorsport article. The installation of vehicle spare parts should only be carried out by a qualified specialist workshop. This serves to ensure proper function and to maintain road safety

Take the opportunity to increase the driving comfort of your E46! With our high-quality MW retrofit wiring harness, you can easily and effectively retrofit the sunblind / rear window blind in your E46.Add this MW retrofit wiring harness suitable for BMW E46 with single button and enjoy an upgrade that improves your driving experience!Full function retention: all functions are fully retained, no coding is required.Scope of delivery: Original MuenchnerWerke retrofit wiring harness E46 sunblind single button Installation instructions, with step-by-step instructions for easy and trouble-free installation Suitable for:BMW E46 saloon and coupé incl. M3 and CSL with single button for the sunblind Important notes:Motorsport articles without a parts certificate or an ABE can be approved for road traffic by means of an individual approval in accordance with § 21 StVO (German Road Traffic Regulations) werden.Ohne this approval is intended exclusively for use on race tracks.If the product text does not expressly refer to a parts certificate or a general operating licence (ABE), it is a motorsport article.The installation of vehicle spare parts should only be carried out by a qualified specialist workshop. This serves to ensure proper function and to maintain the roadworthiness of the vehicle.

Take the opportunity to increase the driving comfort of your E46! With our high-quality MW retrofit wiring harness, you can easily and effectively retrofit the sunblind / rear window blind in your E46.Add this MW retrofit wiring harness suitable for BMW E46 with shift centre and enjoy an upgrade that improves your driving experience!Full function retention: all functions are fully retained, no coding is required.Scope of delivery: Original MuenchnerWerke retrofit wiring harness E46 sunblind switch centre Installation instructions, with step-by-step instructions for easy and trouble-free installation Suitable for: BMW E46 saloon and coupé incl. M3 and CSL with shift centreImportant notes:Motorsport articles without a parts certificate or an ABE can be approved for road traffic by means of an individual approval in accordance with § 21 StVO (German Road Traffic Regulations). Without this approval, they are intended exclusively for use on race tracks.If the product text does not expressly refer to a parts certificate or a general operating licence (ABE), it is a motorsport article.The installation of vehicle spare parts should only be carried out by a qualified specialist workshop. This serves to ensure proper function and to maintain the roadworthiness of the vehicle.

Get our high-quality retrofit set suitable for BMW E46 M3 incl. original tailgate button for your E46 CSL tailgate. If you have installed an E46 CSL tailgate or are planning to do so, this wiring harness is essential! When converting to the E46 CSL tailgate, the handle strip and therefore also the button for unlocking the boot lock are omitted. In the original E46 CSL vehicles, a tailgate release button was installed in the interior, which is located above the bonnet release. Full functional integrity: All functions are fully retained and no coding is required. Scope of delivery: 1x original BMW tailgate button 1x original MuenchnerWerke retrofit wiring harness for tailgate release, illuminated Installation instructions, with step-by-step instructions for easy and trouble-free installation Suitable for: BMW E46 Coupé, Saloon, Convertible and Touring also M3 and CSL Important notes:Motorsport articles without a parts certificate or an ABE can be approved for road use by means of an individual approval in accordance with § 21 StVO. Without this approval, they are intended exclusively for use on race tracks. If the product text does not expressly refer to a parts certificate or a general operating licence (ABE), it is a motorsport article. The installation of vehicle spare parts should only be carried out by a qualified specialist workshop. This serves to ensure proper function and to maintain the roadworthiness of the vehicle.

Get our high-quality retrofit wiring harness suitable for your BMW E46 including M3 and CSL. If you have installed an E46 CSL tailgate or are planning to do so, this wiring harness is essential!When converting to the E46 CSL tailgate, the handle strip and therefore also the button for unlocking the boot lock are omitted.In the original E46 CSL vehicles, a tailgate release button was installed in the interior, which is located above the bonnet release.Full functional integrity: All functions are fully retained and no coding is required.Scope of delivery: 1x original MuenchnerWerke retrofit wiring harness for tailgate release, illuminated Installation instructions, with step-by-step instructions for easy and trouble-free installation Suitable for: BMW E46 Coupé, Saloon, Convertible and Touring also M3 and CSLImportant notes:Motorsport articles without a parts certificate or an ABE can be approved for road traffic by means of an individual approval in accordance with § 21 StVO (German Road Traffic Regulations) werden.Ohne this approval is intended exclusively for use on race tracks.If the product text does not expressly refer to a parts certificate or a general operating licence (ABE), it is a motorsport article.The installation of vehicle spare parts should only be carried out by a qualified specialist workshop. This serves to ensure proper function and to maintain the roadworthiness of the vehicle.

OEM BMW dual mass flywheel bracket 112170